Warning Of Operating Cutting Tool Grinding Machine
Kontaktujte nás
Tel 0086-10-62965622 0086-13910819265
E-mailem:[email protected]
Adresa: No.1034, Building A, Hongfu Science Park, Beiqijia Town, Changping District, 102209, Beijing, China

Warning Of Operating Cutting Tool Grinding Machine


Warning Of Operating Cutting Tool Grinding Machine

1). Wear appropriate safety clothing.

2). Wear glasses and gloves to prevent metal debris damage to your body.

3). Do not be used when the machine is broken down

4). Eliminate safety problems before powering on.

5). Report to your supervisor in case any operation problems

6). Daily checks whether every part work normally and the protective measures are taken.

7). Daily operation and maintenance areas must be dry and clean. Make sure you have all maintenance tools, and they are in good condition

8). Any repairs must be done under the circumstances that the machine is not working and the power is off.

9). Obey the operation procedures and use the information provided.

10). Must not use detergents, gasoline, solvents, or other flammable liquids, for cleaning but the use of non-flammable, non-toxic commercial solvent.

11). Do not use compressed air to clean the machine and its components. Please wear a protective glass and limit the pressure bellow 2bar if you won’t do this.

12). Do not use bare wire for lighting during leak inspection and test

13). Do not lubricate while the machine is running.

14). Before making electrical connections, make sure the voltage and frequency meet the requirements.

15). Electrical power must be connected to the ground for protection.

16). Any electrical operation, for example replacing the fuse, replacing the overload protection, etc., must be handled by professionals, and only after the power cut off.

Zjistěte více informací o našich produktech Přečtěte si více