Pcbn Tool Grind
Kontaktujte nás
Tel 0086-10-62965622 0086-13910819265
E-mailem:[email protected]
Adresa: No.1034, Building A, Hongfu Science Park, Beiqijia Town, Changping District, 102209, Beijing, China

Pcbn Tool Grind


Maintenance of Universal Tool Grinding Machine

Universal Tool Grinding Machine's machine body, mission table, electromagnetic table, grinding head, and electrical appliances are composed of several parts. The structure between the components is compact. The appearance is reasonable, and the grinding head is even. The configuration is accurate and the mission obeys. High, long life and other characteristics. It is used in the processing of all kinds of straight edge tools. Its maintenance adjustment can measure with the feeler gauge on the full length of the blade of the automatic sharpener. At this moment, the oscillating flywheel moves the upper turret up and down several times. Gradually tightening the bolts, nuts and adjusting the gap value of the cutting edge to reach the required stop. The tool grinding machine manufacturer's products are used in a smooth and maintenance condition. Which ensures the normal operation of the tool grinding machine and reduces the occurrence of related problems. This is a skill that users must master when using them. BT-150 series PCD PCBN universal tool grinding machine as a cutting device, greatly help our production activities. In the time of application, we must adhere to the work environment every day, adhere to the tidy body. According to the equipment check card rules check the smoothness of each smooth part according to the rules of smooth drawing. Add high-quality smooth oil in time. Always replace the grinding machine and clean it. And thoroughly check and clean the grinding machine at the end of the year to prevent the growth of dust. And ensure the grinding machine the quality of the application. Usually, pay attention to the smooth maintenance of the universal tool grinding machine. Which can ensure that the grinding machine of the universal tool grinding machine manufacturer is in normal working condition at the same time. And can extend the service life of the tool grinding machine, which is a maintenance problem that cannot ignore the use of the tool grinding machine. When using the PCD PCBN Universal Tool Grinding Machine, the correct operation method is very important. So that the grinding machine can use better, so the correct operation method must understand and valued by the users.

Use of Universal Tool Grinding Machine

If the pressure is uneven during the application of the grinding machine, the blade will eccentric. And the sharpness of each tooth of the blade will inconsistent. When the blade is swayed, the uneven pressure will cause the blade to bulge. If the pressure is too small, the blade cannot be smoothly attached to the sharpening disc. Which is prone to eccentric wear, toothing and center protrusion. If the pressure is too large, the blade is easily annealed and deformed. And the blade life is shortened. The swaying speed is too slow, accelerating the wear of the blade. Shortening the life of the blade. And easily forming the blade annealing. Too fast, it is easy to scrape off the abrasive, easy to break the teeth. It is not easy to grasp the balance of the blade. And the uneven pressure is easy to occur and the center is convex. The tool grinding machine grinds the knife on the sharpening disc with the abrasive cloth too long. And the blade is easy to anneal and deform. If the sharpening stroke is short, the sharp blade will sharpen. And the center of the sharpening disc will quickly collapse. Shortening the application period of the sharpening disc, so the sharpening stroke should be as long as possible.

Main Technical Parameters

Zjistěte více informací o našich produktech Přečtěte si více