Maintenance Inspection Method For Micra-10 Micro Drill Sharpener
Servis
Kontaktujte nás
Jméno společnosti: BEIJING DEMINA PRECISION MACHINERY CO., LTD
Tel 0086-10-62965622 0086-13910819265
E-mailem:[email protected]
Adresa: No.1034, Building A, Hongfu Science Park, Beiqijia Town, Changping District, 102209, Beijing, China

Maintenance Inspection Method For Micra-10 Micro Drill Sharpener


2023-05-19


Development of accessories for drill sharpener

how to make the sharpener's own products and companies more competitive. This is the problem that should be considered when the current enterprise should be the sharpener. As far as the current situation is concerned, the requirements for parts belonging to the world can open up a lot, and the degree of the gathering of these requirements is also a higher sharpening machine for grinding machines, mainly gathered in Western Europe. Knife machines in Asia and North America. Moreover, within such a large demand range, the demand is more than one billion US dollars. How can we get a share in this mall, which requires the acceleration of the development of the enterprise, more to consider the expansion The knife machine has its own enterprise combat effectiveness and competitiveness. The domestic accessories export is also a very large shopping mall, and domestic accessories have been pushed to the tip of the knife. China's domestic fastener industry structure is very turbulent and does not say that its own organization is very turbulent sharpening machine. And the grinding machine and all products are in a stage without hierarchy. It is important to know that a low production level will result in a lower value for the product itself. And, in this case, the price will become difficult to progress. Nowadays, the financial crisis has sprung around the world. These anti-dumping actions and losses are naturally linked to the instability of the domestic fasteners themselves.  

Maintain the method of verifying the drill sharpener

When using the drill sharpener, be sure to pay attention to the fastening. The fasteners should connect reliably, especially the sharpening disc, the sharpening of the sharpening disc is indirectly tied to the precision and quality of the tool grinding. Then you need to pay attention to the Micra-10 drill bit grinder transmission components. The smoothness, bite strength, tightness, etc. of these components are all the deviations that form the transmission system, and thus the ideal grinding result is not achieved. For the wearing parts in the transmission mechanism, there must be a lot of spare parts. Generally, the spare parts provided by ordinary manufacturers are quite sufficient. Once the invented parts are damaged, they must be replaced at any time. When the spindle rotates, the sound is very loud. This is caused by the difference in the bearing position. Perhaps the screw against the spindle is loose. When this problem is encountered, the spindle should be changed or the screw should be tightened. If the motor does not turn when the switch is turned over, check the circuit. If the switch is broken, the switch should be replaced. If it is a line problem, the line should be checked.

The cause of abnormal noise OF Micra-10 micro drill sharpener

Drill bit grinder will inevitably present some problems during the application process. This is a common problem with the machine. This is mainly because when using the machine, some components will be worn away at the moment and then present a series of problems. According to reports, the use of the sharpening machine will show abnormal noise for a long time. What is the reason for this? The first thing that should think of is that its friction is relatively large and the lubricant is lacking. So look for some more joints of activities, check and check to increase the oil. There is also a possibility that the link screw of the sharpener is presented. Loose phenomenon. In this case, we have to check where the looseness is present, and then check if there is any problem with the screw. If this phenomenon exists, screw the screw. The above is the reason for the abnormal sound of the sharpener, and I hope to assist you. Therefore, the machine should inspect frequently. Some parts that are aging should be replaced in time to avoid problems with the sharpening machine and affect the application. Demina is a professional . Our equipment not only has good quality performance, but also the price is relatively affordable. I hope everyone can come and visit.
Zjistěte více informací o našich produktech Přečtěte si více