Grinding Wheel Dressing
Kontaktujte nás
Tel 0086-10-62965622 0086-13910819265
E-mailem:[email protected]
Adresa: No.1034, Building A, Hongfu Science Park, Beiqijia Town, Changping District, 102209, Beijing, China

Grinding Wheel Dressing


Grinding wheel dressing equipment

Due to the complexity of tool application, the professional grinding center must timely repair the grinding plan according to the failure form of the tool being polished and track the effect of tool use. A professional tool grinding center must constantly summarize the experience, in order to repair the tool grinding better, more professional! The produced cubic boron nitride (CBN) tool blank body needs to be sharpened before it can be used for cutting. Generally divided into rough grinding, fine grinding, and grinding process. Rough grinding adopts no. 180 ~ 240 resin bond diamond grinding wheel, feeding volume is 0.01mm/double stroke. Who ~ W14 resin bond grinding wheel for fine grinding, feed 0.05mm/double stroke. Special attention should be paid to the effect of cutting edge dressing of diamond grinding wheel on cutting edge grinding. Although the cutting tool swings back and forth across the whole end face of the grinding wheel during the grinding process to make the surface of the grinding wheel consume uniformly. In fact, the surface of the grinding wheel is still prone to be uneven, which requires frequent dressing. Beijing Demina has produced a . It has online grinding wheel dressing equipment. The end of the grinding can be dressed and cleaned automatically during the grinding with compressed air. The wheel dressing can be arranged in the software interface. It is very useful in tool grinding process.
Zjistěte více informací o našich produktech Přečtěte si více