BT-150M Is Designed For The Manufacturing And Regrinding Of Cutting Tools
Kontaktujte nás
Tel 0086-10-62965622 0086-13910819265
E-mailem:[email protected]
Adresa: No.1034, Building A, Hongfu Science Park, Beiqijia Town, Changping District, 102209, Beijing, China

BT-150M Is Designed For The Manufacturing And Regrinding Of Cutting Tools


The tool grinding machine is a grinding machine for the making of things and sharpening of the tool. The diamond grinding wheel can sharpen all kinds of carbide tools. High precision, good rigidity, economical and practical, especially suitable for sharpening various small and medium-sized things, such as reamer, tap, twist drill, reaming drill, various milling cutters, milling cutter heads, and gear cutters. With the corresponding attachments, it is possible to grind the outer circle, the inner circle, and the plane, and also grind the sample and the mold. It is mostly used in east-west workshops for east-west production plants and machinery production plants.

The operation method of BT-150M Tool Grinding Machine

1. First, determine the diameter of the milling cutter. If you want to grind the 8MM end mill, use the 8MM collet and lock the cutter to the 50D sleeve. 2. Set the angle, the milling cutter sleeve slightly swing 4 ° (the bottom angle of the milling cutter is between 2 ° ~ 6 °). 3. Start grinding the bottom surface, for example, the milling cutter, align the milling cutter with the grinding wheel, complete the tool setting step and then grind the bottom angle of the milling cutter. After grinding one edge and then replacing another cutting edge, the grinding is performed in turn. 4. BT-150M Tool Grinding Machine grind the center of the milling cutter to the escape angle, and swing the sleeve to about 10°, and then grind the center escape angle of each milling cutter. 5. Grind the second clearance angle of the milling cutter in turn. 6. Grind the side edge of the milling cutter, use the top to end the spiral groove of the milling cutter, align the grinding wheel, and push the sleeve to grind the spiral side edge of the milling cutter. According to the above-mentioned universal tool grinder grinding end mill method, you can make your milling cutter still new and solve the milling problem.  

Description of equipment of BT-150M Tool Grinding Machine

Main Machine(BT-150M) and Standard Configuration: 1). Spindle Motor Power: 3.0Kw, Variable speed (500-4000 rpm); 2). Feed axis and tool rotation axis position digital display; 3). Spindle Declination can be arbitrarily adjusted -5°-25°; 4). Max oscillation length is 30mm, the max oscillation frequency  is 60times/min; 5).Optical CCD system with 80x zoom and 15-inch monitor; 6). One Diamond Grinding Wheel and three Grinding Wheel Flange; 7). One spindle cooling water tank and JK-M water tank.    
Zjistěte více informací o našich produktech Přečtěte si více